MAX274BC/D

MAX274BC/D

比較する
MAX274BC/D
4TH- AND 8TH-ORDER, CONTINUOUS-T
データシートなし
比較する

価格応相談

価格更新:ヶ月前
在庫あり: 3495
45
45 か国の顧客にサービスを提供
1000+
世界のメーカー
$140M
5 年間で 1 億 4,000 万ドルの成長
50.0M+
5年間で5,000万個の部品を出荷
Analog Devices Inc./Maxim Integrated

Analog Devices Inc./Maxim Integrated

マキシム・インテグレーテッドはアナログ・デバイセズと合併し、優れたミックスド・シグナルとパワー・ガバナンス・イノベーションのレパートリーを増やし、さまざまな分野で顧客の成功を促進している。この合併は、直流から100ギガヘルツの広がりまで、極小のナノワット領域から堅牢なキロワット領域まで、センサーの連続体からクラウドの幽玄な広がりまで、最も複雑な難問を克服するための解決策のスペクトルを生み出す。アナログ・デバイセズの充実した製品群を、製品資料でさらに詳しくご覧ください。

すべての製品を見る Analog Devices Inc./Maxim Integrated
The MAX274BC/D and MAX275 are continuous-time active filters consisting of independent cascadable 2nd-order sections. Each section can implement any all-pole bandpass or lowpass filter response, such as Butterworth, Bessel, Chebyshev, and is programmed by four external resistors. The MAX274/MAX275 provide lower noise that switched-capacitor filters, as well as superior dynamic performance—both due to the continuous-time design. Since continuous-time filters do not require a clock, aliased and clock noise are eliminated with the MAX274/MAX275. The MAX274BC/D comprises of four 2nd-order sections, permitting 8th-order filters to be realized. Center frequencies range up to 150kHZ, and are accurate to within ±1% over the full operating temperature range. Total harmonic distortion (THD) is typically better than -86dB. The MAX275 comprises of two 2nd-order sections, permitting 4th-order filters to be realized. Center frequencies range up to 300kHZ, and are accurate to within ±0.9% over the full operating temperature range. Total harmonic distortion (THD) is typically better than -86dB. Both filters operate from a single +5V supply or from dual ±5V supplies.

Feature

  • Continuous-TIme Filter - No Clock, No Clock Noise
  • Implement Butterworth, Chebyshev, Bessel and Other Filter Responses
  • Lowpass, Bandpass Outputs
  • Operate from a Single +5V Supply or Dual ±5V Supplies
  • Design Software Available
  • MAX274 Evaluation Kit Available
  • 8th-Order-Four 2nd-Order Sections (MAX274)
  • 4th-Order-Two 2nd-Order Sections (MAX275)
  • Center-Frequency Range:
    • 150kHz for MAX274
    • 300kHz for MAX275
  • Low Noise:
    • -86dB THD Typical for MAX274
    • -89dB THD Typical for MAX275
  • Center-Frequency Accurate Over Temp:
    • within ±1% for MAX274
    • within ±0.9% for MAX275

Applications

  • Audio/Sonar/Avionics Frequency Filtering
  • DAC Output-Smoothing Filters
  • Low-Distortion Anti-Aliasing Filters
  • Modems
  • Vibration Analysis

製品の属性

TYPE 説明 すべて選択
周波数 - カットオフまたはセンター 150kHz
フィルタータイプ 連続、バンドパス、ローパス
製品ステータス アクティブ
パッケージ トレイ
サプライヤー デバイス・パッケージ 死ぬ
パッケージ/ケース 死ぬ
マウントタイプ 表面実装
電圧 - 供給 4.74V~11V、±2.37V~5.5V
フィルターオーダー 8位
フィルター数 4

ブログ

価格応相談

価格更新:ヶ月前
在庫あり: 3495
Analog Devices Inc./Maxim Integrated

Analog Devices Inc./Maxim Integrated

マキシム・インテグレーテッドはアナログ・デバイセズと合併し、優れたミックスド・シグナルとパワー・ガバナンス・イノベーションのレパートリーを増やし、さまざまな分野で顧客の成功を促進している。この合併は、直流から100ギガヘルツの広がりまで、極小のナノワット領域から堅牢なキロワット領域まで、センサーの連続体からクラウドの幽玄な広がりまで、最も複雑な難問を克服するための解決策のスペクトルを生み出す。アナログ・デバイセズの充実した製品群を、製品資料でさらに詳しくご覧ください。

すべての製品を見る Analog Devices Inc./Maxim Integrated

ブログ